Description
Features
- Highly accurate non-contact infrared thermometer that instantly measures surface temperatures of food products
- Allows taking rapid and frequent non-contact temperature measurements without risk of cross contamination
- Measures temperatures from -35 to 275°C
- Features HACCP check lights for instant recognition of safe/unsafe temperatures
| Infrared Specifications | |
| Temperature | -35°C to 275°C |
| Accuracy | (Assumes ambient operating temperature of 23°C ±2°) |
| Between 0°C and 65°C: ±1°C | |
| Below 0°C: ±1° ±0.1 degree/degree | |
| Above 65°C: ±1.5% of reading | |
| Response time | < 500 ms after initial reading |
| Spectral response | 8-14 microns |
| Emissivity | Pre-set for foodservice applications |
| Distance to spot size/Optical resolution (D:S) | 2.5:1 @ 90% energy, typical |
| Typical working range (target illumination) | ≈ 25 mm to 250 mm |
| Minimum target size | 12 mm ø |
| Illumination to IR channel offset | 13 mm |
| Probe Specifications | |
| Temperature | -40°C to 150°C |
| Accuracy | (Assumes ambient operating temperature of 23°C ±2°) |
| Between –5°C and 65°C: ±0.5°C | |
| Below –5°C: ±1°C | |
| Above 65°C: ±1% of reading | |
| Response time | 7-8 seconds (3 time constants) |
| Probe dimensions | Diameter: 3.0 mm |
| Length: 90 mm | |
| Sensor type | Thin-film platinum, class A, Resistance |
| Thermal device (RTD) | |
| Operational Specifications | |
| Repeatability | Within accuracy specifications of the unit |
| Ambient operating range | 0°C to 50°C |
| Relative humidity | 90% (±5%) RH non condensing @ 30°C |
| Storage temperature | -20°C to 60°C |
| Weight | 150 g (with battery) |
| Dimensions | 165 x 32 x 50 mm |
| Power, battery life | 9 V alkaline |
| Battery life | Alkaline, 10 hours minimum @ 23°C |
| Target illumination | High brightness LED |
| Display resolution | 4 digits, 0.1°C |
| Display hold (7seconds) | Yes |
| LCD backlit display | Yes |
| Temperature display | 4 digits, 0.1°C resolution |
| Maximum temperature displayed | Yes |
| Timer | Yes |
| Environmental data | IP54 sealing (hand-washable, non-submersible) |
| Other Specifications (both) | |
| Calibration certificate | Calibration accuracy with NIST and DKD traceability |
| Standards | Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) |
| Certifications | CE NSF |
| Warranty | 2 years |
| Options/Accessories | Replacement probe |
| At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice. | |
Reviews
There are no reviews yet.