AMB-ON-Plus 10000 TL

Key Features

  • Comprehensive display allows easy monitoring and access of UPS status
  • ECO mode and high efficiency power conversion for energy saving
  • Low input THDi (≤5%) to reduce power system pollution
  • Microprocessor control optimizes reliability
  • Charger current can be selected via LCD panel
  • Advanced Battery Management (ABM)
  • Emergency power off (EPO) function
Categories: , Tags: , , , , ,

Description

Specification

Capacity: 10000VA/10000W

Input

              Nominal Voltage: 208/220/230/240Vac

              Voltage range: 110~300Vac

              Nominal Frequency: 50Hz/60Hz (Auto Sensing)

              Frequency Range: (40~70)Hz

              Power Factor: 0.99

Output

              Nominal Voltage(Batt. mode): 208/220/230/240 Vac

              Voltage Regulation: ± 1 %

              Nominal Output Frequency: 50/60Hz

              Frequency Range (Batt.): ± 0.05Hz

              Waveform: Pure Sine Wave

              THDv: ≤ 2% @ linear load, ≤5%@non-linear load

              Current Crest Ratio: 3:1

              Transfer Time: 0 ms

              Surge Protection: 600 Joule

Overload Protection:

              Line Mode: 105%-125%, transfer to bypass after 10min; 125%-150%, transfer to bypass after 1min; >150%, transfer to bypass after 10s; >170%, transfer to bypass immediately

              Battery Mode: 105%-125%, shut down after 2mins; 125%-150%, shut down after 30s; >150% shut down immediately

              Bypass Mode: 125%-150% cut off output and alarm continually after 1 min; 150%, cut off output and alarm continually after 10s; >170%, cut off output and alarm continually after 1s;

Battery

              Voltage: 240V

              Type: Depends on external batteries

              Total Battery Quantity: Depends on external batteries

              Recharge Time (to 90%): Depends on external batteries

              Charging Current: 4A

Efficiency

              Efficiency (Inverter Mode): 92%

              Efficiency (Batt. Mode): 90%

              ECO Mode: 96%

Indicators

              Display: LCD

              Alarm: Batt. Mode, low battery, overload, fault, etc.

Interface

              RS232: Yes

              HID Compliant USB port: Yes

              SNMP: Yes

              EPO: Yes

Management

              Parallel Operation: Up to 4

              Auto Recharge: Yes

              Auto Restart: Yes

              Maintenance Switch: Yes

              Power Management Software: Yes

Physical

              Dimension (W x H x D) (mm): 260 x 708 x 550

              Net Weight (kg): 28

Environment

              Operating Humidity: 0-90% non-condensing

              Operating Temperature: 0-40°C

              Noise Level: <60 dB

 

Note: All specifications are subject to change without notice

Reviews

There are no reviews yet.

Be the first to review “AMB-ON-Plus 10000 TL”

Your email address will not be published. Required fields are marked *