AMB-ON-Plus 10000 TL

Description

• Capacity: 100000VA/10000W

Input:

• Nominal Voltage: 208/220/230/240Vac
• Voltage range: 110-300Vac
• Nominal Frequency: 50Hz/60Hz (auto Sensing)
• Frequency range: (40-70) Hz
• Power factor: 0.99

Output:

• Nominal voltage (Batt mode): 208/220/240Vac
• Voltage Regulation: ±1 %
• Nominal Output frequency: 50/60Hz
• Frequency Range (batt): ±0.5Hz
• Waveform: pure sine wave
• THDv: ≤2%@ linear load, ≤5%@ non- linear load
• Current crest ratio: 3:1
• Transform time: 0ms
• Surge protection: 600 joules
• Overload protection: line mode: 105%-125%, transfer to bypass after 10 min; 125%-150%, transfer to bypass after 1 min;> 150%, transfer to bypass after 10s;>170%, transfer to bypass immediately.
• Battery mode: 105%-125%, shutdown after 2 mins; 125%-150%, shutdown after 30s ;> 150%, shutdown immediately.
• Bypass mode: 125%-150%, cutoff output and alarm continually after 1 min ;> 150%, cutoff output and alarm continually after 10s ;> 170%, cut off output and alarm continually after 1s;

Battery:

• Battery voltage: 240V
• Battery type: 3×20×9Ah for 15 min backup on full load
• Charging current: 4A

Efficiency:

• Efficiency (inverter mode): 92%
• Efficiency (batt. Mode): 90%
• ECO mode: 96%
  Indicator:
• Display: LCD
• Alarm: batt.Mode, low battery, overload, fault, etc.

Interference

• RS232: yes
• HID complaint USB port: yes
• EPO: yes
• SNMP: yes

Management:

• Parallel operations: up to 4
• Auto recharge: yes
• Auto restart: yes
• Maintenance switch: yes
• Power management software: yes

Physical:

• Dimensions (W×H×D) (mm): 260×708×550
• Net weight (kg): 86

Environment:

• Operating humidity: 0.90% non-condensing
• Operating temperature: 0.40°C

Noise level: <60dB